配置完IP网关后这样,eth0里没有IP等信息

Question

配置完IP网关后这样,eth0里没有IP等信息
[hadoop@hadoop000 ~]$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20c:29ff:fee6:43a0 prefixlen 64 scopeid 0x20
inet6 2409:8920:4c10:199d:20c:29ff:fee6:43a0 prefixlen 64 scopeid 0x0
ether 00:0c:29:e6:43:a0 txqueuelen 1000 (Ethernet)
RX packets 124 bytes 15656 (15.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 646 (646.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:0a:50:ad txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Answer 1

Byakuyako 2022-02-20 03:26:26

朋友 你这个最后是怎么解决的，我现在配置完也是只有inet6

Answer 2

Michael_PK 2021-08-09 22:22:39

这个需要严格按照ootb环境进行修改，1）mac地址 2）ip地址 3）dns   这几个是一定要配置对才行。

可以参考：https://jingyan.baidu.com/article/15622f24c6f0aefdfcbea5d8.html

这些是linux的最基础的操作，建议可以到慕课官网找个linux网络的视频，了解下。linux是学大数据必备的

• 提问者 慕虎5466127 #1

  之前是配置成功的没有问题，因为换网络了所以连的热点，重新配置就出现了这个情况

• Michael_PK 回复 提问者 慕虎5466127 #2

  换了网络，ip网段不一定和你现在的网段一样的呢。